Snapper 1687099 User Manual download pdf

Installation

Instructions

Clean-Out Tool Kit

Part No. 1687099

319 / 520 / 551 Single Stage, 5-13 HP

Intermediate or Large Frame Snowthrowers

Figure 1. Contents

This kit is to install a clean-out tool on a variety of

snowthrowers.

Before beginning any service work turn off

ignition, and disconnect the spark plug wire.

WARNING

Kit Contents:

Ref. Part No. Qty. Description

1 1733209 1 CLEAN-OUT TOOL

2 1726727 1 BRACKET, Lower

3 1726728 1 CLIP

4 1726995 1 SPACER, 1-1/4” Long

5 1678392 1 SPACER, 11/32” Long

6 1960727 1 SCREW, Slotted, 10-24 x 2-1/2

7 1960589 1 SCREW, Phillips Head, 10-24 x 3/4

8 1933896 1 NUT, Nylock, 10-24

9 1960729 1 CAPSCREW, 5/16-18 x 1

10 1960730 1 CAPSCREW, 5/16-18 x 2

11 7071880 1 DECAL, Danger

12 1931338 1 Carriage Bolt, 5/16-18 x 1-3/4

DANGER

Do not clean out discharge chute with hands.

Contact with moving parts inside chute will

cause serious injury. Use clean out tool provided

with machine. Use the following procedure to

remove objects or clear the chute:

1. Stop the engine. Remove the key

2. Wait 10 seconds to be sure the auger/impeller

blades have stopped rotating.

3. Always use the clean-out tool. DO NOT use your

hands.

GENERAL OPERATION

After installation of the clean-out tool kit, make sure

clean-out tool is attached to handle on machine. Do not

operate the machine without the clean-out tool properly

stored on the handle.

Upon completion of installation of clean-out tool, keep

these instructions and warnings with the Operator’s

Manual.

Note: For proper use of clean-out tool it may be neces-

sary on some models to remove the wire guard from the

chute.

CLEARING A CLOGGED DISCHARGE

CHUTE

Hand contact with the rotating impeller inside the dis-

charge chute is the most common cause of injury associ-

ated with snowthrowers. Never use your hand to clean

out the discharge chute.

To clear the chute:

1. SHUT OFF THE ENGINE.

2. Wait 10 seconds to be sure the impeller blades have

stopped rotating.

3. Always use a clean out tool, not your hands.

1 2 3 4

Summary of Contents

Page 1 - Instructions

1InstallationInstructionsClean-Out Tool KitPart No. 1687099319 / 520 / 551 Single Stage, 5-13 HPIntermediate or Large Frame SnowthrowersFigure 1. Con

Page 2 - INSTALLATION

2Installation Instructions Clean-Out Tool KitINSTALLATIONDecal Installation1. Clean and dry existing danger decal (A, Figure 2) andsurrounding area.2.

Page 3 - Installation Instructions

3Clean-Out Tool Kit Installation Instructions(TUBE HANDLE MODELS)1. Remove existing hardware (A, Figure 5) from upperhole on left side handle (C) as s

Page 4

4Installation Instructions Clean-Out Tool Kit(520 MODELS)1. Remove wing lock knob (A, Figure 7) and carriagebolt (E) or screw (C) from hole on left si

Comments to this Manuals

No comments

Snapper 1687099 User Manual

Browse online or download User Manual for Cars Snapper 1687099. Snapper 1687099 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Cars Snapper 1687099